|RT + Kit contents|
Kit Descriptions are for informational purpose and are not exact packing list. Actual kit contains many small components
and hardware items too numerous to list.
RT Plus Comprehensive Starter Kit. Items in magenta are components unique to RT Plus.
Complete jig-welded original style Space frame of all round tube sections with additional triangulation for increased torsion stiffness.
Few space frames are all round tube.
Mounts available to accept a wide variety of engines /gearbox choices.
• Comes powder coated in customer choice of over 70 colors at no extra charge.
• Includes RAC approved Roll bar/cage(optional cobra hoops at no extra cost)
• detachable side bars are an upgrade option as is a full race gage.
• fitted and bonded front barley seed pattern floor pan and rear polished floor pans
• Integral transmission tunnel with safety hoops
• Fully rose jointed suspension.
Hand laid MNR Full Ten Piece Bodywork Set Available in over 70 colors.
- one piece fiberglass side/rear panel for ease of assembly
- 2 Rear arches(fenders) with strips of rear wing piping
- 1 Scuttle panel
- 1 Hood(bonnet)
- 1 Nose cone
- 2 Front arches ( fenders)
- 1 Transmission tunnel
- 1 C/F boot cover
- 2 Inner C/F effect side panels
- 1 inner C/F back panel
- 2 foot well panels
- 2 Alloy foot well panels
- 1 Alloy scuttle panel cover
- 1 Alloy scuttle panel pedal cover
- 1 Headlamp bar
- 1 Pair of cycle wing brackets
- 4 90 degree cycle wing bracket arms
- 4 cycle wing bracket sleeves
- Complete body kit mounting hardware including fasteners, piping,harware,rivets,adhesive & number plate screws
Push rod suspension with inboard mounted coil-over adjustable shocks. Fully rose jointed upper and lower tubular wishbones.
Includes complete mounting hardware and high tensile bolts. All suspension parts are power coated at no extra charge.
- 2 front top tubular wishbones takes NMR ½ UNF Camber adjuster
- 8 7/16 UNF rod ends
- 2 ½ UNF rod ends and locknuts
- 2 Threaded camber adjusters long ½ UNF thread
- 2 Front lower tubular wishbones with lower uniball joint
- Uniballs for lower wishbones with retaining clips
Fully independent. Fully rose jointed Unequal length upper and lower tubular wishbones
with mounted coil-over adjustable shocks. .
Comes with complete mounting hardware. All suspension parts are power coated at no extra charge.
- 2 Rear lower wishbones
- 8 7/16 UNF R/H rod ends
- 4 7/16 UNF R/H rod ends, lock nuts and side spacers
- 2 Rear top wishbones
- 4 Poly bush assemblies
- 2 Threaded camber adjusters ½ UNF thread
- 2 ½ UNF R/H rod ends
- Complete rear upright adapter hardware kit for Miata donor upright assemblies
Rear Upright Parts:
Shocks and Inboard suspension Parts: comes complete with all mounting hardware.
- 2 MNR rear uprights tapped-handed
- 2 1/2 UNF x 4 bolts
- 2 1/2 UNF Nylocks
- 4 7/16 UNF x 1/2 inch bolts & 1/2 UNF side spacers
- 20 1/2 UNF washers
- 8 m10 x 30 cap head bolts for bearing to rear upright fixing.
Steering Parts: includes all mounting bolts and fastening hardware.
- 2 Protech shockers on bearings 12 inches long.
- 2 Protech shockers on bearings 14 inches long.
- 2 Front coil springs
- 2 rear coil springs
- 2 Alloy billet rockers
- 4 Cup bearings for rockers & 4 thrust bearing for rockers
- 2 Pushrods
- 2 ½ UNF right hand rose joints and lock nuts
- 2 ½ UNF left hand rose joints and lock nuts
- 4 cup bearings for rockers
- 4 thrust bearings for rockers
- 12 ½ UNF side spacers
Brake Parts/Pedal Box Parts:
- 1 Quick ratio MNR modified steering rack.
- 1 Steering column to rack link.
- 1 Steering column bush set.
- 2 Billet alloy steering rack extensions
- 2 Ford Siera Track rod ends
- 2 steering rack boots
- 2 steering arms from donor rack
- 1 Fully fabricated pedal box.
- 1 Clutch pedal.
- 1 Brake pedal
- 1 Bias bar for brake pedal
- 1 clutch master cylinder with built in reservoir
- 2 brake master cylinders
- 1 brake fluid reservoir
- 6 Pedal pivot bushes
- master cylinder to front T piece pipe
- braided hose set
- master cylinder to rear T piece pipe
- 2 Front T piece to flexi pipe
- 4 way T piece
- 3 way T piece
- 2 Rear T piece to flexi pipe
- brake pressure switch
- 50 P clips for brake line fixing
- mounting hardware and fasteners.
Designed to work with carburetors or FI systems.
- 1 fuel tank with swirl pot.
- Fuel lines, connectors, and filler neck
- 2 Fuel tank straps
- 1 engine cradle & corner bolts for bike engined kit
- 1 engine mount bolts kit
- 1 set engine mounts for choice of car engine
Below are addtional componets required to complete VortX RT Plus:
Parts are in addtion to the comprehensive starter package listed above.
Note: MNR can provide all parts and components to complete build.
MNR Designed and Fabricated Front Upright Kit
- 1 rear Mercury Merkur/ Sierra rear differential
- 1 pair of Merkur/Sierra axle driveshaft assemblies
- 1 pair Merkur/Sierra rear hub carriers and wheel bearings
- 1 pair Merkur/Sierra rear calipers and brake pads
- 1 new custom driveshaft assembly
- 1 used Merkur/Sierra steering column and switch gear
- 1 new MNR fabricated Steering column in lieu of used Merkur optional
Car or Bike Engine Install packages
- 2 Alloy MNR Fabricated uprights
- 2stub axles
- 2 caliper mounting brackets
- 2 billet 4 piston or optional budget front calipers
- 2 caliper mounting brackets
- 1 front caliper pad set
- 2 front drilled. grooved and lightend brake disk
- 2 billet steering arms
- 1 Sprocket adapter (Bike engine Car)
- 1 clutch cable/clutch slave cylinder
- 1 air filter assembly
- 1 exhaust manifold 4 to 1
- 1 engine mounting kit and bolts set
- 1 road specification radiator
- 1 fan assembly
- 1 lower coolant hose
- 1 upper coolant hose
- 1 header tank hose kit
- 1 header tank
- 1 hardware kit
- Exhaust silencer and pipe options are available
Note: Switch gear and harness can be provided from a Mercury Merkur
- 1 wiring harness
- 1 pair of black powder coated headlamps
- 1 pair of front turn signals and indicator stalks
- 1 pair of rear indicator stalks in cabon effect housing
- 1 pair of rear stop/ tail lamps in carbon effect housing
- 1 rear number plate lamp
- 1 road specification radiator
- 1 fan override switch
- 1 Savage start button
- 1 Savage side light switch
- 1 Savage hi-low beam switch
- 1 Savage full beam switch
- 1 Savage Right indicator switch
- 1 Savage Left indicator switch
- 1 Two position ignition barrel
There are many trim options available.Options include driver and passenger seat adjustable runner
- 1 pair of high back two skin fiberglass racing seats
- 8 seat mounting boses
- 1 high tensile seat and belt mounting hardware kit
- 1 pair of Sabelt 4 point seat harnesses
- 1 Super Quadro Flat bottom Suede Steering wheel
- 4 SVA Compliant hood Catches
assemblies,Six point harness with or without Hanns and Odessey padded seat upgrade per pair.
Contact Fastcraft for available upgrades.
- 1 pair of racetech side mirrors
- 1 racetech center mirror
- 1 aero locking fuel filler cap with link hose and retaining clips includes filler pipe
- 4 Team Dynamic Pro Race 1.2 15 inch wheels
VortX Complete Kit Assembly Manual:
Bound 140+ page in color assembly manual.
Also for owners and builders there an exclusive on online factory builders support. Fastcraft build log is also on this site.